INNOVATION & QUALITY
CleanSpace Technology offers warranties on all its products. CleanSpace HALO and accessories – 3 year warranty, CleanSpace ULTRA and accessories – 2 year warranty. If you experience difficulty with the CleanSpace respirator, read the FAQs below or download this simple guide:
TROUBLESHOOTING GUIDE >
If you are still experiencing issues, please click the online form link below to submit your details and our Customer Service Team will contact you.
The CleanSpace respirator will operate up to 8 hours depending on the wearer’s level of exertion. The lithium polymer battery can safety receive short “top up” charges through-out the shift allowing the respirator to be used over a 12 hour shift. ALWAYS start the shift with a fully charged battery (3 green LEDs).
To charge, connect the Respirator to the charger. Turn the Respirator over and check that one of the green LEDs on the keypad is flashing. If none of the LEDs is flashing, the unit is not charging. ALWAYS start the shift with a fully charged battery (3 green LEDs).
The internal battery of the CleanSpace Respirators cannot be changed. Any attempt to open the CleanSpace Respirator casing will void the warranty.
The Respirator is designed to automatically switch off the motor and go into Standby Mode within ten (10) seconds of not being in use. If the Respirator is in Standby Mode and no breathing is detected for 3 minutes, the Respirator switches into Off Mode. In Off mode you will need to press the Power Button to switch the Respirator back into Standby Mode.
The CleanSpace Respirator has several masks: half and full-face masks. The half masks come in 3 sizes (small, medium and large). The full-face mask comes in 2 sizes (small and medium/large). Choose the mask that ensures a close seal on your face and fits comfortably on the face. The correct CleanSpace mask should be fitted by trained safety personnel before being issued for use. Note: CleanSpace Respirators are accredited Respiratory Protection Equipment. We recommend that the wearer be clean-shaven when using CleanSpace Respirators.
There is no way to determine filter life for one work place without significant air quality testing. Every working environment is different regarding air bourne contaminants: hazard risk, exposure levels, and concentrations around the wearer. And the wearers breathing efforts – all impact how long a filter will last. The CleanSpace filters have two advantages to assist filter life i) the filter is located at the back away from the direct path of fumes or dust generated in front of the wearer (i.e. welding, grinding) and ii) the CleanSpace respirators are breath responsive, only pulling air through the filters when the wearer needs it (unlike other PAPRs that have a constant peak flow (>100L/min) which pulls air through the filters regardless of whether the wearer needs the air or not).
The CleanSpace filters should NOT be cleaned. Do NOT use compressed air or any other method to clean the CleanSpace filters. Cleaning the filters can damage the filters and risk the protection efficiency of the Respirator.
For particulate filters, the CleanSpace Respirators have a filter alarm. The alarm (audible and visual) detects when the particulate filters are blocked and will beep during use and the filter light (RED) will come on. For gas filters, there is no way to detect when the gas filters activated carbon is exhausted. The wearer should be aware of work place policies on the use of Respirators with gas or combination filters, if the wearer detects a noticeable taste or smell then they should immediately leave the contaminated area and change the filters.
The CleanSpace filters are constructed from flame retardant materials. Testing has shown that the filters will not ignite when exposed to sparks or open flame.
Get in Touch
SPEAK TO OUR CUSTOMER SERVICE TEAMContact us >